Hi well after replacing the driver and pass door locks (which are fine now) the bloody rear doors are playing up the previous owner has put seperate looks on the doors not the ones build in the handles. but any way if you shut the rear doors they look into the clips (holes) at the top and bottom of the van but after a bit of driving (normal not going mad) the bottom part of the doors pops out of the hole thingy but the top stays in and you have to push the bottom of the doors for it to pop back in any help would be much appreciated

This would be the rear doors of the van not the slideing ones. The hole (clip) at the bottom you refer to has 2 torx screws (1 at either side) Loosen these screws and slide the clip outwards (it has a small amount of movement) You will probably find that it has been pushed to far inward with regular use of the door therefor when you close the door it simply is not locateing properly