17-06-2008
| #1 | ||
| Changing the cambelt Are there any do's and do'nts for doing this ? Is there any special tricks I should know etc ? Replacemet intervalls ? Never having done this on a Fiat and having owned my Scudo for over a year I think it is time to replace the belt befor it breaks on it's own. Thanks in advance.
__________________
| |||
|
|
|
17-06-2008
| #2 | ||
| Re: Changing the cambelt Hi there its Linden, i changed my cambelt at 70000 miles. Dont atempt it unless you are competent. Bottom pully wont undo without a nut gun, cam timing is timed by inserting a 7mm bar through the cam pulley into a locating hole. Be ultra careful when fitting new belt that you dont break the cam sensor which is fitted on top of the rocker cover, if you do it is a part of the rocker cover & cant be purchased seperately. Good luck
__________________
| |||
|
|
|
|
17-06-2008
| #3 | ||
| Re: Changing the cambelt good advice would be to replace aux belt as well,see my thread and check alternator bearings are ok.
__________________
| |||
|
|
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
 (G) changing cambelt on fiat punto 1.2 sx60 | Minto | Punto | 14 | 3 Weeks Ago 00:56 |
| changing cambelt 2.8 | laikaman | Ducato | 3 | 03-07-2006 22:57 |
 (T) HELP - Cambelt | pSeudo | Bravo / Brava | 9 | 12-03-2006 10:34 |
| (T) Looking at changing 2.0 20v cambelt in situ | fixitagaintomorrow | Marea | 17 | 03-02-2005 21:13 |
| (T) No spark after changing cambelt. Suspect immobiliser | caber | Punto | 1 | 21-08-2004 22:34 |
