extra rear seats Scudo

Just bought a set of three (double and a single) rear seats for my 07 Scudo They are the factory made removable ones that latch into runners.
I also purchased the seat belts.
My question is how do I fit them and what should I look out for.
I can't see any dot punch marks to drill out floor pan or and logical place to anchor the seat belts.
Any help please???

alan

Just bought the same,

Fitted mine by assembling the seats fitted into the rails.
Offered them up in the van as one unit, marked the rail positions, took out the seats, put the rails back in place, maked the holes and drilled through the van floor and used 12 pukka bolts with Extra large washers underneath to ensure a secure fit.

BE CAREFUL, that before you drill, you're not above the fuel tank, or a chassis rail that won't allow you access to the back of the nut.

Took me an hour and a half.

As for the seatbelts, I've not fitted them yet, but it looks fairly straight forward, there are telltale holes in my van to show where theyd go, I just need to figure on how to sort the captive nuts on the back of them.

Hope that helps.

Oh, and for the rails, I cut the plylining so they sat on the van floor, then relaid a thick rubber matting to raise the floor level to the height of the rail runners, if you know what I mean. They look factory fitted.

Dave

I found captive nuts welded to underside of van floor for all but three of the bolts
Drilled up through centre of the nuts then enlarged the holes from the top with a countersink so as not to wreck the thread
the remaining three holes I used 8.8 grade bolts, lock-nuts and big washers

Seatbelts, access front ones for guidance
I had to drill a small hole to take the little ant swivel pin 20mm away from the existing fixing hole for the roller mechanism
The top anchor point, yes I will have to make an access hole big enough to feed the nut through as there seems to be no captive nut.

Got less than 2 hours to finish the job, pack the camping kit, attach 16ft canoe to the roof, throw in some warm clothes, collect five kids an set off for an unknown campsite nr. Hay on Wye for a well deserved break

Nice one, you got a grip on that soon enough, be interested to see some pics of the lower mounting for the seatbelts..

We're off to Camber/Greatstone Kiteboarding for the weekend..

Looks like a great weekend all round.

Job done and it all looks and works a treat, well pleased with finish and safety standard.
unrelated issue but Kite Boarding!!!
Where abouts are you? I just bought a f****** great kite and trying to find a spot to fly it (drag myself half way across a field more like!)
I'm in Birmingham

Hi,
sounds good..

I fly wherever the tide is in and the winds blowing..
Am based over in Thetford ( Norfolk )

Fly at Rougham airfield, Hunstanton and Brancaster, we go down to camber a lot..

have a look on www.fueledbyisobars.com

Happy to advise, what Kite/s do you have?

Oh, and I fitted my seatbelts tonight, very pleased with how theyve come out too. Did you find the original mount behind the card panel? what a touch eh..

original mount...
Not sure but it all seemed to fall into place especially the bottom bit.
Will check out the isobars link now. Yes nice clean wind blowing off the sea, no trees, no hills but Birmingham is not the best place to find such conditions!!!

All this talk about kites make me feel very interested in trying it out. (But that could just be red wine talking!!!)

Lol, red wine/beer/Haribo go very well with kiting.

check out our website and look at some of the gallery pics.. its good way to spend some time.

Website???

OK Just found it fueled by isobars

I also fly kites / get dragged arround by them and have a scudo

Surfers have VW's Power Kiter's have Scudos!

Well,

Unfortunatley I'm surrounded in our little group, by a T5, 2 T4s, a Vauxhall Combi and a Transit.

So I'm the only one flying the Scudo flag lol.

Hi All

I have some fiat scudo seats for sale on ebay

check out item 120277541785

thanks

Tom