(T) Help With Alarm Fitting

Hi...I ve recently bought a DIYGTI alarm with remote central locking off ebay. However I m having a few problems fitting it mainly with the wiring to the central locking. I not 100% sure which central locking wires i need to wire the alarm to, and I don't wanna do it blindly a risk messing up the whole central locking system. Also will I need to take the door panel off to get the central locking wires? If anyones had any experience fitting these particular alarms, could they please shed a bit of light on it for me please!!

Thanks
Duxy

have you checked the wiring guide sticky in the security section?

I ve just had a look then!Its helpful, but what I m confused with is this ACC bit i ve been reading on other posts. My alarm has an remote egine start on it, but i don't want to connect this up as it means bypassing the immobiliser, and I don't wanna mess around with that. Do I still need to wire it to the ignition so the alarm realises that someone is in the car or not??

the alarm needs ignition live so it cant arm when the engine is running.also if it has features such as auto door locking etc

yeh mine does have the auto door locking feature!Is this just a single wire that goes to the ACC then, or is it a lot of wires!!lol!