Hi,

I have an Lancia Y 1999 with a 60HP 1.2 8v FIRE engine. Same as the puntos. I wonder what airfilter does fit on the air intake. I want to remove the entire air-hood an replace it with a power filter. But I cant find anything to fit.

dexcraft should fit fine..
http://www.dexcraft.com/fiat-carbon...nquecento-seicento-carbon-air-intake-kit.html

or a GSR..
http://www.torque7.co/Fiat_MPISPI_S...ing_Punto_induction_kit/p1901230_8800019.aspx

They are the 2 i would buy, and thats my order of preference too

MultiRacer said:

Hi,

I have an Lancia Y 1999 with a 60HP 1.2 8v FIRE engine. Same as the puntos. I wonder what airfilter does fit on the air intake. I want to remove the entire air-hood an replace it with a power filter. But I cant find anything to fit.

Click to expand...

is punto engine straight fit?

should be easy swap, they are closely related to a panda and alot have a FIRE engine (not all of them though, the turbo or gtie for example have different engines completely)

easy swap? does that mean that engine + gearbox mounts are same? wiring?

mounts won't be the same but if its fire engined one then you can just swap the mounts over and it will bolt in. Just like taking a p60 and dropping it in a cinq/sei.

wiring will be similar but there is no set way to do these things - you could use y10 stuff and run some of the y10 engine parts, like distrubutor setup rather. Or you could use full punto loom and ecu etc and do some wiring to make it mate up to the body loom so the clocks and stuff work.

interesanto

flisko said:

is punto engine straight fit?

Click to expand...

Well the Ypsilon looks the EXACT same under the hood as some Puntos

blu73 said:

dexcraft should fit fine..
http://www.dexcraft.com/fiat-carbon...nquecento-seicento-carbon-air-intake-kit.html

or a GSR..
http://www.torque7.co/Fiat_MPISPI_S...ing_Punto_induction_kit/p1901230_8800019.aspx

They are the 2 i would buy, and thats my order of preference too

Click to expand...

I heard the air-hood of the Palio 1.2 also fits onto 1.2 8v FIRE. And I allready have a powerfilter but it didnt fit the intake. But kind of hard to find that part.

yep palio bob will fit - to use that you would need to make your own induction kit from some bits.. Some silicone bits and maybe a bit of metal pipe.

this is a palio bob on a sei, same setup would work on yours fine, use whatever filter you like on end really.

blu73 said:

yep palio bob will fit - to use that you would need to make your own induction kit from some bits.. Some silicone bits and maybe a bit of metal pipe.

this is a palio bob on a sei, same setup would work on yours fine, use whatever filter you like on end really.

Click to expand...

Thats what I like to see & make haha, thank you! What power filter is that?
Here's a picture of my noob set-up, please dont laugh. I removed the airfilter in the air-hood and just put the powerfilter on the rubber pipe

That is a BMC CDA, they are pretty expensive but they flow great (Y)

If i were you i'd put it back to stock for now, your filter is pretty much sat on the exhaust manifold, hottest area in the entire engine bay.

MultiRacer, can you bend the filter to the left side ? there it is much more cooler ==> more hp for just bending an airfilter over

from a power point of view you prob still be better sticking the panel filter back in until you got a better setup. If you want noise just drill some holes in the airbox (before the filter)

blu73 said:

from a power point of view you prob still be better sticking the panel filter back in until you got a better setup. If you want noise just drill some holes in the airbox (before the filter)

Click to expand...

Allright will do! Thanks.
Will look for the Palio airhood tomorrow. Kinda hard to find arround here.

It's a power filter indeed, it will filter power away from your engine....!!
That's the worst set-up I've ever seen.....!!!