mk2 angel eyes instructions and contact.

Can you not just replace your standard headlights with angel eyes? without having to do all that work?

take old 1s out put new 1s in?

these for example:

http://cgi.ebay.co.uk/FIAT-PUNTO-MK2...QQcmdZViewItem

yes, this thread was before the ready made ones was out, this way only costs you about 16 quid though

have brought a proper pair of angel eyes for my mk2, but i am having serious problems removing the originals them from the body work, any one got any ideas?

Hello mate and WELCOME TO THE FORUM!

If you mean the headlight itself, then----

There are 3 10mm bolts holding the headlight on. Undo them....(2 at the top of the headlight and 1 on the side)
You will need to remove the bumper, or move it forwards slightly to get the headlight out. I normally do this by removing the 2 bolts either end of the bumper (under the wing) and then the two bolts in the middle of the bumper (at the top that you see when you open the bonnet). This will allow you to move the bumper forwards enough to remove the headlight. Then unplug the electrical plugs at the back, and your done.

Hope that helps,
Alan

thanks ill give that a go!

have now fitted angel eyes (brought of ebay) and they look amazing!
the angel eyes i wired straight on to the original side lights wire after the adaptors. the hardest thing was getting the flipping bumper off...so many bolts so many place haha!

highly recomended

photos to come soon!

hello,
does anyone knows the exact ring dimension in mk2 ? inner and outter size ? I can't find it anywhere and I need to know it before order.