Got myself a set of bk239 hp black alloys for my punot jtd.They have pcd of 98 and an offset of 38. going to fit 195/50/15 tyres to them and quite fancy putting spacers on to widen the stance and improve looks.

I see motorworld do a set of 10mm spacers for about £12. Seem to be hubcentric as well.

Can anyone see any problem for me fitting a 10mm spacer to each wheel?

you only need spacers to correct the offset so you need a 5mm one on each wheel and 5mm longer bolts

http://www.performancefx.net/wsfiat.htm

So the bolts i got with the alloys are no good. Will any alloy wheel bolt do or do they have to be for a bk alloy? Also looking at putting the 15mm spacers that bolt onto the hub on which means i could use the bolts i have doesn't it?

that will be a lot of money and wear out your wheel bearings.

http://www.performancefx.net/wsfiat.htm

So if i have a set of 15" alloys for a mk2 punto with a rim width if 6.5j and am going to fit 195/50/15 tyres to them will i get away with having no spacers or will i get a bit of rubbing on full lock? The et for these wheels is 38.

you will get a bit of rubbing on full lock, but 5mm spacers from the link above will sort it