I've just bought a punto and discovered it had got a leak from rocker cover so I changed the gasket.A week later its still leaking,I don't want to over tighten the screws so can anybody with a manual,supply me with the correct torque wrench settings. This would be much appreciated!!!!!

Tighten to 6 lb/ft or 8 nm and use a new gasket and some sealant. They all do it, these Fire engines - even the 1108 Cinqs!

Pete.
Cinq sporting 1242cc
http://mysite.freeserve.com/close_to_cracking_up/

My Panda has an early FIRE engine and this does it too

Steve

Drives a Panda 1000CL [:0] but still has a sense of humour!

I used sealant with a new gasket on my old 60s and it seemed to cure the leeking problem.

2000 ELX , (1998 60S got mashed)