Technical Meta remote locking with alarm for Punto mk2

Currently reading:
Technical Meta remote locking with alarm for Punto mk2

Joined
Sep 9, 2015
Messages
200
Points
44
Hi,


Please advice me to buy a meta remote locking system with or without alarm for my punto mk2 1.2 16v elx speedgear 2000. I can lock all doors using key in driver door lock. No remote locking. And please tell me what is this connector near the wiper linkage under scuttle. is it for factory fitted alarm? but I do not have interior sensor which should be near the map reading lights?. What is the best option? to buy factory alarm+sensor or meta?


Thanks
 

Attachments

  • WP_20170116_20_01_13_Pro.jpg
    WP_20170116_20_01_13_Pro.jpg
    261 KB · Views: 180
This post contains affiliate links which may earn a commission at no additional cost to you.
Dont bother with alarm... sooo many dont come with them... more likely to cause issues vs actual use

As for meta kit was an after production upgrade kit
Expensive! But totally worth it
Much better working than when i retro fitted a afternarket one

I didnt fit my meta kit as it camewith the car
It does sometimes do auto door locking ince uve been driving (2nd brake pedal press)


Ziggy
 
Dont bother with alarm... sooo many dont come with them... more likely to cause issues vs actual use

As for meta kit was an after production upgrade kit
Expensive! But totally worth it
Much better working than when i retro fitted a afternarket one

I didnt fit my meta kit as it camewith the car
It does sometimes do auto door locking ince uve been driving (2nd brake pedal press)


Ziggy


Thanks Ziggy, But the problem is there are lot of part numbers for same meta model. I found 46001872 etc will this M872 AN-/M15 fit for my car or what part number to select?. Car is 2000 made punto mk2 1.2 16v elx speedgear cvt auto
 
Back
Top