Technical RECALL NOTICE's

Currently reading:
Technical RECALL NOTICE's

Status
Not open for further replies.
Joined
Oct 15, 2010
Messages
4,741
Points
1,069
Location
Yorkshire
Recall notice from FIAT for following models included Punto 2012.

Launch Date:07 December 2012

Please check you are one of the effected and seek assistance from local FIAT dealer.

Recall Ref: R/2012/139
Exact Model: 500, Punto, Qubo, doblo Panorama, Doblo Cargo and Fiorino
Description: BRAKING EFFICIENCY MAY BE REDUCED
VIN: Various
Build Date: 01 June 2012 to 30 September 2012
Numbers: 3095
Defect: A connector on the brake servo pipe may fail and cause a loss of vacuum assistance necessitating the driver to include additional effort when braking.

Action: Recall the vehicles that are likely to be affected to fit a new brake servo pipe.


PLEASE NOTE NOT ALL MODELS ARE EFFECTED. IF UNSURE CONTACT YOUR NEAREST DEALER
 
Recall notice from FIAT for following models included Punto 2012.

Launch Date: 07 January 2014

Please check you are one of the effected and seek assistance from local FIAT dealer.

Recall Ref: R/2014/005
Exact Model: PUNTO VAN
Description: VEHICLE MAY ROLL AWAY
VIN: ZFA1990000P025145 to ZFA1990000P035011
Build Date: Sep-13
Numbers: 4
Defect: It has been identified that the hand brake lever may not have been manufactured to the correct specification. It could result in the vehicle rolling away.

Action: Recall all affected vehicles and replace the hand brake assembly with a new quality controlled assembly


PLEASE NOTE NOT ALL MODELS ARE EFFECTED. IF UNSURE CONTACT YOUR NEAREST DEALER
 
Recall: No. 1 of 8
Recall Ref: R/2011/023
Exact Model: Abarth Grande Punto, Grande Punto and Punto Evo
Description: FIRE MAY OCCUR
VIN: various
Build Date: 01/07/2009 To 31/03/2010
Numbers: 5121
Defect: The layout of the ABS wiring maybe incorrect in the area of the battery holding unit. The wiring may on some vehicles maybe trapped and pinched, exposing wiring in some area. this may cause damage and in extreme cases a potential risk of fire.
Action: Repair to inspect and repair the wiring using industry accepted soldered connectors
Launch Date: 28 March 2011
 
Status
Not open for further replies.
Back
Top