I need to replace the front bumper on my 100HP. Could someone please advise how the bumper is fixed. I have removed fixing screws along the top and bottom edges, but there is still resistance, so I'm guessing there may be hidden screws.
Technical 100HP front bumper removal
- Thread starter ribbit
- Start date
Currently reading:
Technical 100HP front bumper removal
If memory serves, the manual says it's a headlight out job for some screws in the inner wing. It may be possible to reach them by removing the plastic wheel well liners although I've never tried. It's possible someone else has found an easier way?
You do need to pop out the front edges of the wheel arch liners, then you can access the Torx and hex headed bolts at the top rear corners. Headlights can stay in.
- Joined
- Sep 14, 2009
- Messages
- 19,492
- Points
- 3,294
Shop4parts sell replacement fasteners for reasonable cost or you can look on eBay.
this thread may help..its what I used..
https://www.fiatforum.com/panda/321786-help-fiat-panda-front-bumper-removal.html
https://www.fiatforum.com/panda/321786-help-fiat-panda-front-bumper-removal.html
