Technical Panda Door Lining Removal

Currently reading:
Technical Panda Door Lining Removal

Joined
Apr 26, 2014
Messages
11
Points
56
Hi,
I need to remove the door lining from my 2005 Panda.
I cant see any retaining screws so I guess its held on with clips.
I would be grateful for any tips on how to remove the door lining without doing to much damage.
I need to get at the electric window winding mechanism.
Thanks in advance for any helpful tips.
 
Remove the two small plastic covers round the release handle, there's some screws there. There's also a screw under the grab handle/arm rest bit, you'll need a 5mm Allan key for two of them. After that's it's clips, but be careful you don't damage the release handle cable by pulling too far
 
2 cross head screws on bottom as well. about 8 pull off retainers and a circlip holds the window winders if your taking the back ones off
 
Thanks to the Forum Members who replied with useful info.
I have had the door lining of and the nylon window guide has broken of on one side and was catching so I cut the broken bit of.
I am going to try and get a new one if they are available.
(y)
 
Back
Top