so my panda has 2 buckled wheels so i want to replace them with some different wheels

I've thought about steelies, pro race 1.2 and 1.3 etc but i want something different.

also thought about some styling wheels such as 3sdms and xxrs but they've all been done before.

is there anything within the fiat brand that would fit?


Thought i'd ask you lovely panda folk for inspiration

Every 16" Fiat 500 Wheel.

Mine has a buckled wheel, too. Do you want to buy my good ones or would you sell your good ones and how much? (too late probably for me as my 15" steelies have arrived).

There is an Italian company that has good OEMs and replicas, too on ebay, seller: stefano_nn1

I quite like this: ELTEX STYLE silver (4 holes pcd 98), 6,5j x 15 et33


I considered TD Pro Race 1.2 but avoided them for 2 reasons: I had them in a Subaru in the past and one of them was off centre and it was bought new(!) and they are 7" wide, the Panda already has good handling, with 7" it would be even less playful.

One of my favourite wheels is the Speedline Turini, they are 4x100 though (they used to be made in 4x98 but not anymore), you can fit them with wobble bolts but they were expensive and I didn't want to start spending big $$$ in this car so I bought some steelies and will paint them silver.

I had 7x16" ET31 black steelies with 195/45R16" tires on and it drove like a razor.

Steelies is the way forward

fpan said:

Steelies is the way forward

Click to expand...

Yep, they are now on my 85 Lounge.

Have a look on oponeo.co.uk
Lots of alloys and some steels.

Bought mine steelies @ Oponeo.

btw, here my former 169 with the 16" black steelies.

I really Like the steelie look on the panda. Really suits it I think but I think the uno turbo alloys are top of my list but worried they won't fit :-/ also I think it's going to be hard to find a set

Lancia Beta 14" alloys... Works fine on ours

And - top tip - use Volvo wheel bolts : just the right length...

Punto Sporting alloys fit!


These are my other set:


Taken when I got the car back in Jan.

JR45 said:

Lancia Beta 14" alloys... Works fine on ours

And - top tip - use Volvo wheel bolts : just the right length...

Click to expand...

What offset are they?

They may fit on a non-100HP but doubt they will fit a 100HP if they are anything bigger than ET33/35.

ET 31.
With 10mm spacers on the front wheels...
(As per my profile picture)

JR45 said:

ET 31.
With 10mm spacers on the front wheels...
(As per my profile picture)

Click to expand...

Just realised I made a typo...
That should be ET34, not 31
So with the spacers on they are 9mm wider than standard at the front and 1mm narrower at the back...

I've got a straight and true wheel and one more that is very slightly out are they of interest to you?

I was going to keep the OEM wheels but couldn't find a straight one.

Thanks for the offer mate but I'm either going for uno turbo wheels or banded steelies after seeing your steelies