Does anyone know where i can get the 'Y' shaped exhaust rubber mount that goes on the drivers side of the backbox, i had to destroy the old one to get it off when i put an ulter-sport box on and now it won't stop rattling against the bodywork and thats with some of those rubber mounts recommended for use with after market exhausts.

twinairturbo said:

http://www.ebay.co.uk/itm/like/261194509188?hlpht=true&ops=true&viphx=1&lpid=95&device=m&adtype=pla&crdt=0&ff3=1&ff11=ICEP3.0.0&ff12=67&ff13=80&ff14=95

Click to expand...

Top banana

Gavv8 said:

Top banana

Click to expand...

No problem

Out of curiousity (since I'm about to mount my towbar): Is there a way to remove them without destroying 'em?

gr J

You can buy a tool i will try find it later

I've now fitted 2 x rear boxes and the original 2003 mounts are still good,

give metal rods a good clean before starting and a LITTLE lubricant means the rubbers just slide off - with a lever behind them..,

you can always use a cable tie around the dodgy rubber to keep things in line, # sometimes better than a new one..

Charlie

Guy in the carpartsshop knew exactly what tool was meant. However the tool was €45 and 2 rubbers €10 so that was an easy choice.
I lubed the hangers with siliconespray and had a jack under the box, but absolutely no movement.
Depending on the weather I'll try again soon and get the Westfalia attached.

gr J

You can get them for £12 http://www.toolbox.co.uk/sealey-vs1...n=GoogleBase&gclid=CNbX2Y2b4roCFfMdtAodpFIAqw

Great price, but I'm not on the British Isles Found a few on the Bay, but with shippingcosts it would still be close to €40.

gr J

I tried taking it off without destroying it but ended up losing my temper with it, there's no room between it, the backbox silencer and the bodywork.

Exactly why I bought new ones first. I'm not really famous for being patient with things like these

gr J