Technical Adding the alarm lights to aftermarket Remote locking unit.

Currently reading:
Technical Adding the alarm lights to aftermarket Remote locking unit.

Dantji

New member
Joined
Jul 24, 2013
Messages
1
Points
1
I've been through hell ... :devil:

As I've just finished installing an aftermarket remote locking system in my wife's 2004 panda which didn't have central locking, and the system wasn't designed for cable locking doors.
The Dutch weather also didn't help us a lot :S

But my brother in law and me managed to get it to work :)
Now was wondering how to get the alarm lights to blink, when locking or unlocking the car.

Preferably from the inside of the car, where we've placed the receiver near the fuse box.
The receiver has 2x 12V wires which give a current when the remote is activated.

But to which wires ( colors ) do i have to connect them?
-Near the alarm switch
-Near the connectors on the fuse box ( Black and BLue)

I have found some info in E-Learn, but i just can't figure it out.
 
Last edited:
Back
Top