I have a stereo setup from a previous car that I was thinking about fitting to my 100HP, however this is my first time having bluetooth and steering wheel controls so I am only going to fit the stereo if both will still work. As far as I'm aware the stereo I have has connectors on the back for the steering wheel controls, so I assume I can connect the controls in there (obv), and I have been told by my dad who did the same with his old 156 that the bluetooth is seperate from the stereo and I would be able to link up the in car bluetooth to the new stereo, is this possible?

Any help would be appreciated

No the Bluetooth is part of the head unit, if you change it steering wheel controls might not work and no Bluetooth.
When I had a 100HP I replaced the head unit with a Kenwood, I managed to get a custom built Can Bus adaptor,(cost a fortune) I had steering wheel controls but no Bluetooth.

puffed out daddy said:

No the Bluetooth is part of the head unit

Click to expand...

No, not on the Panda it isn't, there is a seperate unit for BT. I've heard of one or two managing to keep if functioning, but I'm not sure how.

Hopefully mine will as it has some sort of connection for bluetooth. Thanks for the help lads.

I've replaced my stereo recently but I couldn't find a way of keeping the Bluetooth so had to get the Bluetooth adapter for the stereo