Save up to 15% with Adrian Flux insurance!

General Alloy dashboard kit for the Panda.

Currently reading:
General Alloy dashboard kit for the Panda.

S

specs78

Member
Joined
Dec 16, 2004
Messages
251
Points
54
Location
Cambridge
Hi, I have heard some of you going on about getting a alloy dashboard kit for the Panda. I would like one myself if I get one, how much are they?
Also I would like a leather steering wheel and gear knob, can these be brought as well for a UK spec Panda Eleganza? Thanks again everyone.
 
from the brio magazine:

leather wheel and gear knob, ref:50900971 £132.35
aluminium effect vent and gearlever kit , ref:71802296 £81.90

personally i think the wheel and gearkit doesnt look all that, but i do like the vent surrounds, and may on an impulse have them fitted at servicing as a treat for mrs t along with the "sports pedals"
 
If you buy an Eleganza, do you get a leather wheel on that model? Also how do I get hold of the "brio" mag? Thanks again....
 
it was an optional extra on the eleganza, i cant find the original options list we looked at when we bought the car, however the brio catalogue should be available at any of the fiat dealers, along with a accessories catalogue that is specific to the panda
 
Hi,

I looked in the options list and it doesn't mention a leather steering wheel. I found the alloy dashboard kit on Ebay. I only paid £16 for it! It is a genuine Fiat part. Although it is called 'aluminium' dashboard kit it actually seems to be made of plastic. In the fitting instructions it says that you have to remove the sleeve around the gearstick. This is not necessary. You can just stick the gearstick surround and air vent surrounds on without removing anything. It is a five minute job. Important is that you fit the gearstick surround the right way round. It fits both ways but it will not stay in place when you fit it wrongly. The side that is marked front has to point to the front of the car.
 
Recycled Ferrari said:
Hi,

I looked in the options list and it doesn't mention a leather steering wheel. I found the alloy dashboard kit on Ebay. I only paid £16 for it! It is a genuine Fiat part. Although it is called 'aluminium' dashboard kit it actually seems to be made of plastic. In the fitting instructions it says that you have to remove the sleeve around the gearstick. This is not necessary. You can just stick the gearstick surround and air vent surrounds on without removing anything. It is a five minute job. Important is that you fit the gearstick surround the right way round. It fits both ways but it will not stay in place when you fit it wrongly. The side that is marked front has to point to the front of the car.
Click to expand...

I've had a look for a "kit" on Ebay, and they haven't got any! Damn, back to the drawing board....
 
You must log in or register to reply here.

Similar threads

C
General Dashboard bulbs Panda
Replies
2
Views
284
koalar
koalar
A
General Annoying noise from the dashboard of Fiat Panda
Replies
0
Views
244
Axen7
A
V
Technical Short circuit traced to the F1 engine compartment 70 amp fuse - Dashboard Unit Supply
2
Replies
27
Views
449
VictorB
V
koalar
General What is the Panda A5
2
Replies
29
Views
1K
koalar
koalar
S
General Go for this cheap 2008 Panda?
Replies
13
Views
554
Yolanda
Yolanda
Back
Top