Shop4Parts - UK's largest online superstore for FIAT and Alfa Romeo parts

General Panda Parts Request

Currently reading:
General Panda Parts Request

Pandani said:
Sorry to hear the bad news. Hope the scumbag gets what he deserves.(n)

I have a black steering column shroud and the dashboard end caps all in black. There's a hole in the shroud where the choke knob would be located, if you've no choke you could blank it off by gluing a circular black piece of plastic over it. It's second hand so not pristine but otherwise they're fine.

You can have them for FREE but just pay me for the postage which won't be as dear as you'd think from N. Ireland.

I guestimate no more than £15 but would get it weighed and costed at Post Office and let you know before sending any money and also include receipt of postage cost
Click to expand...
Restoring my faith in humanity, that would be brilliant. They fingerprinted the car thoroughly so hopefully they'll get them.

It does have a manual choke (probably why they didn't get very far) so that's ideal.

I'll pm you.
 
lucienlucienlucien said:
It does have a manual choke (probably why they didn't get very far) so that's ideal.

I'll pm you.
Click to expand...

No problem at all. I got them as part of a complete 'dashboard set' on eBay but didn't need them; only needed the speedo display housing but had to buy the lot. I don't throw out Panda spares as you never who might need something and would rather give them away than dump them.

Anyway, I've given them a quick clean up before sending and have noticed that the hole for the choke knob has been damaged around its edges so I hope it's still OK for you?

20170204_160554.jpg 20170204_160603.jpg

If the cops ever get the wee scrot who did this to your Panda you could show them how to use a choke cable. Get the cable and choke them with it! :)

If you're absolutely really stuck in getting a replacement window glass and ignition, I know of a Panda at a local breakers in Armoy that has them but I don't know what they'd charge for P and P; also they may no longer have the key for the ignition. Panda window glass I believe is reversable from passenger to driver side.
 
Pandani said:
No problem at all. I got them as part of a complete 'dashboard set' on eBay but didn't need them; only needed the speedo display housing but had to buy the lot. I don't throw out Panda spares as you never who might need something and would rather give them away than dump them.

Anyway, I've given them a quick clean up before sending and have noticed that the hole for the choke knob has been damaged around its edges so I hope it's still OK for you?

View attachment 176948 View attachment 176949

If the cops ever get the wee scrot who did this to your Panda you could show them how to use a choke cable. Get the cable and choke them with it! :)

If you're absolutely really stuck in getting a replacement window glass and ignition, I know of a Panda at a local breakers in Armoy that has them but I don't know what they'd charge for P and P; also they may no longer have the key for the ignition. Panda window glass I believe is reversable from passenger to driver side.
Click to expand...
Amazing. I've pm'd you.
 
Pandani said:
Pandani said:
As per your personal message request, this is the stuff for the suspension I was looking.



From the attached eper image I'm looking for:

2 x item no.8 part no.7548292 (insulating ring)

2 x item no.9 part no.7536074 (plate)

2 x item no.10 part no.7635773 (spring)

2 x item no.7 part no.5967921 (insulating ring)



naread.exe


I've already got a pair of item 11, new dampers and a new Omega axle.
Click to expand...



Sent another order enquiry for you!
Hopefully in stock now
Will let you know asap
[emoji106]
Click to expand...
 
Thanks lukmek but I'm going to have to forget about the seat covers; I know you've gone to alot of effort but I really want them with vinyl backs and sides.

I'm definitely still keen on the suspension components and will go ahead with the wheel trims.
 
Ordered the wheel trim for you
I sent you PM
Thanks
 
Hopefully will arrive this week
[emoji106]
 
Hello lukmek, sorry it's been a few days since you PM'd..

The part I'm after is the splash guard/protector for front N/S. I've found one from Bulgaria however it's £30 postage (£50 all in) & wondered if it would be any cheaper through you :)


Also I'm loving the seat covers! Any chance the patterns are available as I'd love to make my own
 
Last edited:
chugbi said:
Hello lukmek, sorry it's been a few days since you PM'd..

The part I'm after is the splash guard/protector for front N/S. I've found one from Bulgaria however it's £30 postage (£50 all in) & wondered if it would be any cheaper through you :)


Also I'm loving the seat covers! Any chance the patterns are available as I'd love to make my own
Click to expand...

Hi
I will try to find a cheaper one for you
for the seat covers the original fabric is nearly impossible to find
I know a company that does the seat covers to fit perfectly with the old ones or as a full replacement
the full set cost around £150/190 depending on the fabric
if you are still interested I can send you more info or just browse this thread for sample I sent to Pandani
 
Brown carpet mk1
IMG_0447.JPG
IMG_0448.JPG
IMG_0449.JPG
The first two original Fiat Linea accessori
£70
The last one original Everest Evergomma
£30
 
PandaCan
Original fiat Ricambi
Going to ask shipping cost for you if interested
£39.99
IMG_0468.JPG
 
You must log in or register to reply here.

Similar threads

J
General Panda Van
Replies
0
Views
56
Jacko Mallorca
J
W
General Classic Panda Parts for Sale
Replies
10
Views
925
bevfisher
bevfisher
C
Technical Oil Panda 900 Young 1170A1.046
Replies
0
Views
221
ctln91
C
G
General Panda classic gearbox fire engine
Replies
11
Views
213
porta
porta
ROGUEPIX3L
Technical 1989 Panda 4x4 won't start.
Replies
4
Views
332
Dragon Man
Dragon Man
Back
Top