Technical weber icev

Currently reading:
Technical weber icev

Joined
Jan 11, 2008
Messages
1,167
Points
330
Location
shropshire
Hello,

I have running issues at the moment, the car is missing, and then bogging down. and then fine.

I have so far put new leads, plugs, fuel filter, points, condenser, and a new coil on it.
Still have the same issue.

At the moment it has the original carb on it, I have a weber ICEV in the shed I would like to put on to rule out the carb completely (this autochoke thing is a nightmare)
Does any one have a diagram of this please? I can see fuel in and out, and coolent in and out but not sure which is which. Also wanted an idea of the choke and throttle linkage setup?

Thanks :)
 
This is great!
Could you tell me what the other 2 entry points are?

There is a small one under the the choke linkage, just to the left. And on the bottom towards the back, or front of the carb there is another one?
 
smaller one under the choke is a vacuum for the ignition advancing{green}, the other one is connected with the thick breather pipe under the air filter.{red}{ I always plug that blank, because there is often an air leak there and it interrupts the smooth idle, plus I can not figure it out what this is for:p:p, some kind of bypass?, anyway works well without it:)}

 
Back
Top