Hi guys, trying to locate a replacement lambda sensor, the one i have has 2 block connectors on the wires, i presume this is a 4 wire one, so i could just by a generic 4 wire and solder the wires to the connectors ??? or need propper fiat one, its a 1994 998 SPI panda parade(donor).

also might replace the map sensor as well, i think its one of these....
http://www.ebay.co.uk/itm/MAP-SENSO...arts_Vehicles_CarParts_SM&hash=item4cf3ff82c0

but seem to be slightly dofferent for engine type ?? or am i been daft.

thanks

kevin

PS, you guessed it, thought i got rid of red injector ligth problem, but itsa back with a vengence, seems to be running rich.....

My local motor factors was able to supply one a few months back so may be worth asking yours before you go to Fiat.

yeh thought that but i dont have the reg anymore from the donor car ???? unless i kept the number plates ?

can always try with engine spec and say it had a cat...but thats not fitted to my car....

kevin

Use the reg from one of the parades on here...

Would someone like to PM me there panda parade 1994 998 spi reg......so i can get the sensors.

kevin

Doesn't Have to be a Parade just as long as it's an SPI from 94. My reg is M497 SWF. No point keeping it a secret, there's plenty of pics of it on here.

VmanC said:

Doesn't Have to be a Parade just as long as it's an SPI from 94. My reg is M497 SWF. No point keeping it a secret, there's plenty of pics of it on here.

Click to expand...

But yours isn't the one and only 998cc is it Vern :devil:

Most Easterly Pandas said:

But yours isn't the one and only 998cc is it Vern :devil:

Click to expand...

Not yet.

Dare I say that I have an exhaust with sensor you could have for free as I don't need it....but your not really local to me.

Hi, where do you live....i am off to france on friday

bradford to hereford thursday, friday morning to dover, over to calaise then to reims over night in etap then saturday to alsace....

so depending where you are i could call on the way back.

only an idea mind

kevin

East Grinstead....near gatwick.

i'm using a generic ebay bought o2 sensor and has been in there for a couple of years

bit fiddly connecting the wires to the old connectors but apart from that was 5 min job

does the engine cycle when idling? or is it just rich running?

btw watch your antifreeze as the head design is quite weak and mine corroded to death across from the water channels, was an expensive fix when i took the head off

amazing how well the engine was running considering...