Hi all, little help for a panda newbe, or hopefully!

Im looking at getting a panda, I have seen one for spares and repair thats in other wise good condition, but the clutch cable has broken, and so has the bracket. Its a 1992 Panda 1000 CLX

Before I jump in I just wanted to make sure this is a reasonably easy part to source?

Thanks every one
Emm

From recolection there's about 6 different clutch cables. You'd be better off finding one that is in good working order plenty about on ebay and classifieds normally.

Hi Emm

Am presuming it's the '92 CLX on ebay at the moment (not much gets past the auction watch section on here!). Maybe ask the seller to send you a photo of the clutch arm and cable, might help in sourcing a spare. Good luck with it.

David

It is indeed, Im deciding if I want to place a bid however, its quite far away from me and would require low loading

the cables on post 1988 models are modified and dont break that often question is why has it broke? might just be old age but it could be that the clutch is "heavy" putting extra load on the cable causing it to break, if it was that easy to fix then why has the seller not done it as the car would be wort alot more if it was driveable.

Im giving it a miss, Its simply to far away and with no gearbox, No test drive, and running out of MOT, thinking about it it smells a little.
I have also tried to get in to contact with the seller today to ask a few questions and get a idea of his/her character.
No matter, some one on here may well get a bargain, wont be me though