Technical The correct way to bleed the brakes.

Currently reading:
Technical The correct way to bleed the brakes.

Brutusnl

New member
Joined
Dec 20, 2014
Messages
26
Points
9
I have to replaces 2 brake lines. Front side off my car. Is there a way to bleed the lines correctly. I mentioned this. Whit my old car there was a special order to do this. RR RL FR FL. Is this the same on my palio. Or slightly different.
Thx brutusnl
 
Best to change all 6(!) brake lines, two at front and 4 at the rear of the car.
(I have a set of 6 lines for sale if you're interested...).
Start with the brake that's far away from the mastercylinder, so rearside right, than rear left, front right, and last front left.
Put a piece of wood under brake pedal ( so you can't depress it all the way and destroy inner seals)
Have someone else press brakepedal, and of you go...!!
Or have it done in a workshop with a pressure bleeder, quick and easy....
 
Thx Peter..I need to wait for a dry day outside to do that. I got the hoses for my front brakes. 17 euro each. Both side of my palio I will replace at the same time. Will flush all brakes. I don't know how old the brake fluid is.

Is the clutch also hydraulic. One of my previous cars have this system.
 
Back
Top