Hi Guys, I have just joined and would appreciate some assistance with a reluctant heater blowing cold air.
The first problem encountered is getting the horn/air bag module removed so that the steering wheel can come off.
There are 3 access holes but there does not appear to be any item to allow removal, so any help will be much appreciated,
Thank you.

Ian Tulloch

Ian Tulloch said:

The first problem encountered is getting the horn/air bag module removed so that the steering wheel can come off.
There are 3 access holes but there does not appear to be any item to allow removal, so any help will be much appreciated,

Click to expand...

Flat head screw driver, use it to lever the spring latch off the retaining clips

Ian Tulloch said:

Hi Guys, I have just joined and would appreciate some assistance with a reluctant heater blowing cold air.

Click to expand...

Manual heating or digital climate control?

Most Easterly Pandas said:

Flat head screw driver, use it to lever the spring latch off the retaining clips



Manual heating or digital climate control?

Click to expand...

Many Thanks.
Do you mean the screwdriver to prise off the horn unit?

The heater control is digital. The Haynes manual does not really help much to remve the controls.
Ian T

haynes manuals arent much good nowadays.

to get the horn unit off, you have to put the scredriver in and prise the little tangs to the outside of the wheel whilst pulling slightly on the airbag (make sure you have the battery disconnected).

it should put out reasonably easy once you get the hang of it. its hard to explain, but this post should help:

https://www.fiatforum.com/panda/338097-panda-airbag-removal.html

Many Thaks, the photos certainly help to clrify the process.
Ian T