Punto (Mk1) Indicator problems

Currently reading:
Punto (Mk1) Indicator problems

Nats17

New member
Joined
Jan 9, 2017
Messages
1
Points
1
My hazad lights come on when i indicate left. Any ideas. Thanks.
 
having a similar issue myself, my rear right indicator slows down when I brake, and braking with the headlights on it doesn't work at all!

have had trouble with that same brake light before so surely a connection/wiring issue?
 
Hi, take off the rear tail lights and take out each bulb and clean .Also clean the holders,removing all oxidisation. I tend to use a very smooth wet and dry paper. I then put one of those little satchets of silica jel at the bottom of the tail light away from any connections. This helps to absorb some moisture for a while.
 
agreed, this sounds like classic earthing issues. Clean the connectors and bulb holders out first - then if you still have problems move onto the actual wiring but my money is on some corrosion in the bulb holders. A dremel with small brass wire brush attachment is brilliant for cleaning out the bulb holders ;) Remember to clean the bulbs themselves too if they are a bit manky too.

side note: welcome to FF Nats17 :wave: More mk1 Puntos are always welcome ;)
 
Last edited:
Back
Top