Hello everybody, I´m Jorge from Spain, I had a Fiat Stilo 1.9 JTD 115cv since July 2011 and since March 2012 an Abarth too, but the last one makes me a lot of problems and I am thinking about take it to pieces and sell some of it

Sorry for my English but I do as I can... jejeje

Greetings from Spain!

welcome

thanks guy!

In my Stilo Abarth, the 5 gear was bloqued, and i can´t change gear, can somebody help me?

EDIT: the car doesn´t starts

Have you checked the battery?

And welcome to the forum!

yes, battery checked, connect nav+ works but the car, don´t starts

What about the fuses/relays?

Does everything else work? Like the lights, aircon windows etc?

yes, everything else works

thanks everybody for the replys

You should check the relays in the engine bay fusebox. When you turn the ignition to "start" the car, do you hear a clicking noise from the engine bay?

welcome to the forum newbie from spain. hope you enjoy it on here.

yes, i hear it...

thanks tim woollands

So the starter motor clicks, does the engine turn over or is there nothing after that? Your starter motor could be the problem in that case

i hear a click, but the click isnt from the engine, the problem is that i can´t put the gearbox in neutral position and the car doesnt starts, i dont thinks its from the starter motor

Is the abarth a selespeed I take it? Possibly some sort of relay making the click then?

Perhaps the ecu isn't reading the new gearbox, something I'd reckon could only be a problem with the selespeed box? You should look to finding out if doing a proxi allignment will sort it.

the fiatecuscan says that the proxy alignment isnt necesary and the gearbox is the original

Sometimes I forget which thread I'm posting to :/

Are there any fault codes stored on the ecu?

abs and asr but nothing about gearbox

nobody can help me?