General 2004 1.9jtd Cheap multipla

Currently reading:
General 2004 1.9jtd Cheap multipla

hadalad

New member
Joined
May 11, 2015
Messages
34
Points
14
As per title my cheap multipla for sale spares repair or break for parts if enough interest
everything complete apart from the sump, just changed it last week and bang it went when I hit a speed bump too hard.
Engine is perfect and was stopped before any damage was done to it
let me know what you want or take the whole car
cheers Keith


located Hadston Northumberland
 
I changed my sump and the one I took off is ok some small cracks in it you can hardly see, easily repairable with chemical metal while it's off ? I'm in manchester if you want it ?


Sent from my iPhone using FIAT Forum
 
I changed my sump and the one I took off is ok some small cracks in it you can hardly see, easily repairable with chemical metal while it's off ? I'm in manchester if you want it ?


Sent from my iPhone using FIAT Forum


cheers for the offer mate but after a lot of thought I think the car is to good to scrap....so I have decided to get my old sump welded up and put on the car, at least this time round I know all the bolts won't be a pig to get off as I replaced them all when fitting the replacement sump
cheers
 
You must have hit the speed hump at some speed, I can fly over them in mine!
 
You must have hit the speed hump at some speed, I can fly over them in mine!

I drove over it the same speed as I always done, just wondering if I bolted everything up tight when I re fitted it


I had to remove the gearbox mounting half shaft alternator and a load of other stuff just to get to all the bolts.


Sirias thanks again if I need your help I will let you know
cheers
 
That's cool if u need it let me no and it's yours it isn't going any ware


Sent from my iPhone using FIAT Forum


Hi again I might just need that sump after all as I am struggling to find another one


did yours leak when on the car ? does it need welded ??
my leaking one has about 13 cracks in in and would be a pig to weld
cheers
 
It did leak but I was thinking while it's off clean it and skim it in side with chemical metal, just a nice thin layer, should work ?


Sent from my iPhone using FIAT Forum
 
Back
Top