Anyone with a scrapped multi with a front drivers side hub carrier they would part with?
Cheers,
Marty

Any good . . .
Multipla hub
What's happened to yours by the way?

I had that bought would you believe but shipping was a problem.
Have one coming locally now.

The threads on the pinch bolt stripped and i didnt replace it on time...in the meantime the hole that the balljoint pin goes into had gone a bit oval...

Hopefully the ABS sensor etc will be an easy enough swap over...not too hopeful that it will tho!

Marty.

Well, good luck with it, let us know how you get on . . .

Ok got the spanners out today...
First off I had to turn down a 36 socket to get the hub off.... It requires a really thin walled socket.
Then the disk was seized to the hub!... It gave in after a while though.
One of the pinch bolts holding the hub carrier to the strut was seized solid.
Took a good hour to get it out... I actually used a hammer drill to pulse it out for a finish... It was pretty resilient.. As bad as I've come across.
Next was the dreaded abs sensor... I wisely took the whole hub off by disconnecting the sensor under the bonnet... The routing is tricky but doable... I tied some cable to it before I removed it.
A good hour of gently prising and pushing from below and out it came... I can see how so many people break these, not an easy task even on the bench.
Rebuild went fine, getting abs cable back where it belonged was tricky.
Took me a good 4 hours all in. ... It's all good again now .
Marty.