I have a set of 16" Alfa alloys from my sons old marea. I was going to stick them on the multipla but the ET is 41. Does anyone know what size of spacer I would need to fit the Multipla properly?

Most are universal as I try eBay under multipla wheel spacer there is some x7 standards from Colchester 5er each and original built for multiplas hope this helps

I think Multi's standard offset is ET35 so a 5mm spacer will do it, speak to richie.guy and he'll sort you out with the extended bolts as well.

https://www.fiatforum.com/classifieds/showproduct.php?product=22172&cat=17

They might not fit the multipla has 2 spikes about a inch long that the rim sits on needs a couple of small holes drilled The originals r 5mm multipla ones on a referb job but as for the bolts not a clue about them do they have to be high tense bolts

The 'spikes' (if they're anything like every other Fiat) should just undo with 10mm or 11mm spanner.

12mm take them out they are not important, they just help with a wheel change. dont get multi fit spacers get ones with correct pcd and c/bore

dave said:

12mm take them out they are not important, they just help with a wheel change. dont get multi fit spacers get ones with correct pcd and c/bore

Click to expand...

Yeah 12mm, that was what I meant
Richie's spacers are the right ones, and very well priced too