Hi Mate, How did you do your Speedo lights? as ive got no lights atm so i cant see them unless im in the day lol
- Jay
Hi mate there's a Gide on here somewhere if you search for punto mk2 led change should come up,
If not here's a quick Gide
-take dials out of car
-take black plastic back off
-remove the trip and clock buttons of front by pulling them (don't bend)
-remove the black plastic car holding the glass as one don't remove glass!
-use a fork to remove needles and mark the fuel gauge so you know where to put it back!!
- remove the gauge front (the bit with numbers and speed on)
-use a pair of pliers to straighten the metal clips holding the LCD screen in but don't remove the metal cage
-gently unclip circuit board until its free of the white plastic bit
- use the plastic white case you just removed as a guide to what LEDs need changed! Now the tricky bit,
-useing tweezers remove one led at a time remembering were the little notch on the led is and solder the new one on in the same place
easy if you can solder not so easy if you can't
hope it helps