media.jpg

Grande Punto Ryan's Red Grande

Introduction

Heres a few pictures of my GP i know i have another thread but this one will be updated instead of the other one. Progressing from standard to how it is now.

Thanks for looking (y)

Standard
media.jpg


Carbon wrapped dash
P1000263.jpg


Gloss black pillars
P1000278.jpg


Custom sub box
P1000274.jpg


Black alloys
P1000323.jpg

P1000324.jpg


Wrapped sub box
P1000325.jpg


Door cards wrapped to cover up horrible stained material
P1000326.jpg


Random from modified nationals
P1000542.jpg
  • Like
Reactions: Cairnsy
Last edited:
had nothing to do today so thought id change rear speakers and to my question i asked ages ago yes the same size speakers fit in the back just go to have a few washers on to step it up as doesnt sit entirely flush. but they are now in and the sound is much better, more of a surround feeling where as before it was more just the fronts :D

next mod....... springs (y) nice 60mm drop
 
Why not just change the fader setting so it comes from the rear a bit more. Saying that I'd like to modify my speakers as the sound quality isn't quite there for me was it a straight swap with wiring and which speakers did you use?. Also I don't think springs drop the car by 60 mm? You need coil overs for that sort of drop I think. Although I don't know a lot so I might be wrong haha
 
Last edited:
To my knowledge also you need coilies for a drop that size, but its worth it. If i could afford it i'd go for it, but i settled for less money to make mine look more lady like, and less like the lady in the sky :p
 
well it says they are 60mm so hopefully it will drop near enough that. the speakers i used were the size of the front and i just put some small washers around the fixings so it stood off a little them when got that sorted just fixed them in place. i just cut the plug off the old and added a little bit of wire that came with them cos it had the connectors for the speakers then just soldered together and bish bash bosh job done
 
cheers gunna call in at halfords today and see what they have. Is there any graphic designers or anything on here that fancy helping me design some stickers for me and a few mates? heres my 2 ideas that ive had
 

Attachments

  • P1000767.JPG
    P1000767.JPG
    2.9 MB · Views: 91
  • P1000768.JPG
    P1000768.JPG
    2.7 MB · Views: 83
Had a little incident with a long eared animal last night, wont be running anywhere now after hitting it at about 70mph. Luckily only caught the splitter and not the bumper, snapping splitter in half, so this morning had to screw it back into place and notice that it is only stapled on :confused:. All sorted now so GP 1- Rabbit 0 :slayer:
 
Fully fixed the splitter today as only had time to temporarily fix it when i did it, so took all the staples out so could get it back straight and then used self taping screws right across. Should hopefully fix the problem if it occurs in the future. Also changed oil finally and checked the spark plugs, they seem to be like goldeny brown colour tried taking a picture, do you guys think they need changing or are ok for the moment?

thanks ryan
 

Attachments

  • IMG-20120914-00105.jpg
    IMG-20120914-00105.jpg
    458.5 KB · Views: 76
Back
Top