Mr FIAT - Your #1 source for vintage car parts
luke15000-1.JPG
luke15000-1.JPG

Punto (Mk2/2b) My Punto MK2 1.2 16v.

Overview Gallery Discussion

Introduction

Mods include:

K&N Induction Kit
Stage 1 Remap
Vent Filter
35mm Lowered all Round
Tinted Windows
Beesting Aerial
New Exhaust...(Performance cant remember the make lol)
Black Seat Covers
Silver Centre Console
De Rub Stripped
TSW Black Ice Alloys
Ripspeed Dvd/CD Player :(
MTX Audio 250w RMS Sub
Infinity 6x9s with alpine 250w Amp
LED's in footwells and in rear facing onto rear speakers
Sparco racing pedals
Alpine 300w front speakers
Kenwood 200w Rear speakers
Mesh on front vents
And of course FF Stickers on side windows and rear window!

I dont think i left anything out however small they are!

Future Mods Which are coming very soon include:

New double sub box with my other sub fitted inside of it.
My new amp fitted for the other sub
Tinted rear lights.
And my amps fitted with perspex over top of them (Sort of a boot conversion but should look sick!)

I have been having a lot of problems with this car recently... just found out i going to need a new ECU as it is misfiring on 2 cylinders and its not any other part such as coil pack which is faulty :bang:... The punto will be up and running for the SOUTHEND CRUISE on 13th March! Cant Wait!

Any advice about car would be great! and comments appreciated!

luke15000-1.JPG


luke15000-2.JPG


luke15000-3.JPG


luke15000-4.JPG


luke15000-5.JPG


luke15000-6.JPG


luke15000-7.JPG
Click to expand...
Re: My Punto MK2 1.2 16v

Right i thought i would update this in what i have been doing in the past weeks, i aint been able to get on due to the block internet keep going down. I have been quite busy here goes...

Well heres my front bumper all sprayed up prob could do with a little bit more laquer on the sides of the bumper but the colour match and spray is prety good especially for me and with the resources i had!

IMG00069-20101018-2003.jpg

IMG00070-20101018-2004.jpg

IMG00072-20101018-2004.jpg

IMG00073-20101018-2004.jpg

IMG00083-20101027-2207.jpg

Next is the spoiler which i sprayed and also the rear bumper sprayed at the same time as the front, i have only managed to put them on as the bumper needed prep work to mount it an as it is not a geniine abarth it is one of those replicas. I also had to wait for the new backbox as the old one had been melting my old bumper away! i have just got to make a heat shield type thing to make sure this new exhaust doesnt melt the new bumper!

IMG00084-20101027-2207.jpg

IMG00085-20101027-2208.jpg

IMG00090-20101101-1629.jpg

IMG00098-20101101-1750.jpg

IMG00099-20101101-1758.jpg

Here is a picture of my new backbox, it is quite subtle compared to the other letterbox exhaust from before.

IMG00100-20101101-1758.jpg

Tell me what you thunk guys i need feedback lol
 
Re: My Punto MK2 1.2 16v

luke15000 said:
I hope to be doing that and also the front fiat badge, but you have to weld dont you? just seems like a lot of work!
Click to expand...

Yeh m8 you need a weld a plate. Grind around the fiat badge recess with grinder. Using the fiat badge as a template cut out the circle from metal tack in place then doing spot welds all the way around. Dont continues weld around u will warp the bonnet due to the heat. Grind down the spots so they are flush. Body filler sand etc. Thats the only 100% way of doing it. Dont fill with the recess with Body Filler or P38 I.E fibreglass the recess will just sink over time due to movement.
 
Its been a while since i posted on my thread as i have been so busy, I now have my new alloys, i am running on zitos now in white with yokohoma s drive tyres, these are 16" as these are the size i need for my new brakes when i get them. To go with this i now have white mirrors, handles, washer jets and white abarth spoiler. Tell me what you guys think :) Next step is coilovers and then the new engine when its in!

Have a look at the pictures, these were taken at graffiti tunnel in London.



Cheers guys :)
Luke
 

Attachments

  • DSCN0881.JPG
    DSCN0881.JPG
    2.2 MB · Views: 55
  • DSCN0886.JPG
    DSCN0886.JPG
    2.1 MB · Views: 51
  • DSCN0885.JPG
    DSCN0885.JPG
    2.2 MB · Views: 43
  • DSCN0887.JPG
    DSCN0887.JPG
    2.2 MB · Views: 47
looks well niice bud, maybe white the abarth bumper lower lip aswel? and front bumper lower lip the recess bit i mean would look well nice then :D

the blue and white really goes mate(y)
 
Cheers mate, well the rear bumper is cracked atm at bottom lip dont know if you can see it, so i now have an original rear bumper skirts and front bumper, i getting them sprayed very soon and am only paying for the paint no labour charges :)

But when the new bumpers are on i am going to be painting the mesh white to break it up a little should look good :)
 
luke15000 said:
Cheers mate, well the rear bumper is cracked atm at bottom lip dont know if you can see it, so i now have an original rear bumper skirts and front bumper, i getting them sprayed very soon and am only paying for the paint no labour charges :)

But when the new bumpers are on i am going to be painting the mesh white to break it up a little should look good :)
Click to expand...

yh sounds sweet bud...not spoken for long time hows engine coming along ??

im turboing me 1.2 8v atm wont be as fast as your engine though haha(y)
 
New it was you that i saw in lakeside huge meet on saturday. Was thinking i saw this car somewhere then as i looked more saw the fiat Forum sticker. Was not in my punto at the time tho was in my mates GT. your car looks great in real life :)
 
Last edited:
Thanks a lot for the comments! Appreciate them! A lot of time has gone into this now always working on something new each week!i think this weekend i gonna smooith the bonnet so should look good! if you see me again mate just give me a wave or come say hi! dont know any fiat owners! haha.

I see your thread brin mate it looks sweet an is coming along nicely! keep up the good work mate, the engine is all in pieces just getting cleaned up really now awaiting money for some wosser forged pistons and rods then will be assembling it finally! :)

Take care guys keep the comments rolling :)
 
mate lovely looking motor,when youve got the coilies on and got that bonnet smoothed she will be looking spot on!

just a little tip you can buy a blanking grommet foryour rear wiper if you wanted to get rid of it without welding, then you could just spray that so it all looks flush?? just a little tip if you wanted to do it
 
You must log in or register to reply here.

Similar threads

Peter91Skippy
  • Vehicle
Punto (Mk2/2b) 1.2 16v 59kw Luigi
Replies
0
Views
77
Peter91Skippy
Peter91Skippy
iABDOzz
  • Vehicle
Punto (Mk2/2b) Fiat Punto MK2 SX Silver 8v 1.2 - 138000KM
Replies
0
Views
510
iABDOzz
iABDOzz
Robbie13
  • Vehicle
Tipo (Classic) 2.0 16v 5-door 1992.
Replies
0
Views
65
Robbie13
Robbie13
S
  • Vehicle
124 Coupe My piccolo bella
Replies
0
Views
49
Sintax Error
S
PeterinWales
  • Vehicle
500 (Electric) My 500 electric
Replies
0
Views
200
PeterinWales
PeterinWales
Back
Top