What Power Is Your Fiat Running?

OK as suggested in the RR thread in events, lets compile a list of peoples rolling road results.
So put your model, engine size/type, what mods you have (including who mapped the car) before and after power/torque (in lb/ft to avoid confusion) and a RR printout if possible

I'll start:

Punto
1.9 8v JTD
Mods: GSR Induction Kit
Chipped UK Remap
Before: 80bhp & 145lb/ft
After: 128bhp & 209lb/ft




(If we could have this stickied that would be great )

could you also put WHO remapped your car too... so we can work out who gets the better results

and maybe what it was before (mines standard at the moment, 115bhp, 200lb-ft of torque i think)

yeah pretty useless with out before and after, as it gains that is important

Yeah, I think you should include who remapped it and what other mods you have (e.g. induction, exhaust) and what the car was running before.

Also, maybe we should come up with a standard template that people can copy and paste?

2001 Seicento Sporting
1.2
Turbo (VAD lowboost)
97bhp
104 lb/ft

figures above were taken directly after the conversion 2years ago
have to get Louie to upload the printout as i dont know how to do it

ohwa! will have to dig out the graph for that!

apologies i was in a rush to leave work. Fixed now

8hp
1/4 cylinder engine, maybe 300cc's
no torques to speak of
remapped by noddy

That lot are blind ..the company that did the mapping are written on the graph

My new panda is all of 60 bhp and mapped by fiat and staying that way ..

till peter gets hold of it, you got an induction kit fitted yet

my jtd produces identicle power to h2dae's graph, mapped at same place but is a later 85hp model

[quote=toad101;1337060]till peter gets hold of it, you got an induction kit fitted yet

/quote]

Hope no induction kit is going on the new panda [the kit has been worked off mine though and it should be completed in due course on his next visit to me ]..and while I will help peter in any way posible this car is staying standard

my old Stilo JTD 115 was getting 116bhp and 196lb/ft of torque
after remap 159bhp and 250lb/ft of torque remapped by ChippedUK

Current Stilo Abarth is standard 170bhp, although I have a BMC panel filter so maybe 171bhp now

1998 punto 60

standard: 60 bhp and 98 Nm (72.3 lb/ft) (ok not exact to my car, but good reference point)

RR'd at 70.2 bhp at 5423rpm and 87 lb/ft at 3000 from what i can work out from the graph

mods: Mkritch chip, GSR induction, and an exhaust creation of me & jordan (really loud)

not bad....

punto mk2 1.2 16v


angel tunning remapped and a bmc cda

ecu reset to standard map and pre learning mode, 75 bhp
with their latest map for the car 79 bhp

torque is hard to see due to scale on graph but it is up a tiny bit