Technical Running out of options

Currently reading:
Technical Running out of options

Suffolkfiat

New member
Joined
Apr 5, 2012
Messages
9
Points
3
Location
Lowestoft
I have had my ECU on my 1.9jtd cleared as this was causing the car not too start, when it was pluged back onto the car the engine mangement light whent out and the keys where coded in but now there is no fuel pressure! There defenantly was fuel pressure before the ECU was sent away.

Any suggestions what could be causing this my mechanic said it would be very unlucky for the fuel pump to fail when the car has not been used.
 
Hi: It's possible that the ECU is no longer switching the pump relay, so the pump's not working. Before looking at anything else, get you mechanic to check the ECU plug. It's not uncommon for the pins in an ECU plug to back out slightly into the connector when you plug it back in.


Andy
 
Back
Top