Technical this boot problem on weekend estate

Currently reading:
Technical this boot problem on weekend estate

philbrads

New member
Joined
Jan 23, 2005
Messages
1
Points
1
seems a common problem, and now its got worse, i to had this problem with a sticking handle, so in my wisdom decided to get a complete back (plastic) panal lock included, all looked fine when it arrived, and straight forword to switch over, then it began :bang: when putting every thing back all was going well till i tried the handle, nothing happend , stripped it down again, and when looking at it , it seems that the centre pin (on fly wheel?)moves then in turn moves the sleeve/barrel attatched to the two metal rods, this was my problem that when it was all fitted, the centre pin was not turning?,took it apart and tried off the car the centre pin would move, however any risistance on the centre pin or where the rods are attattched would cause it to fail agian, like there should be a spring pulling it or something, any ideas its really getting to me and somehow i know its going to be looking me in the face, thanks in advance if there is more information you need please feel free to email me [email protected]
 
Back
Top