Hi,

I am building a race car to compete in the 750 formula championship which is part of the 750 motor club. This formula encourages you to design and build your own car. You also need to use a Fiat 1.1 fire engine. Body work (without aero stuff) is attached.

We have taken an engine from a Punto. It did have an ECU but this has been trashed. In order to just get the car running (we can upgrade later) we want to use a distributor and coil.

Does anyone know the exact parts that we would require for this conversion? I have seen some distributors on the smaller engines... not sure if they would suffice for a 1.1

you're in luck, it is a very common distributor and coil setup that you need for a 1.1 FIRE.

you can use the distributor and coil from any of these:





FIAT Coupe 2.0 (16v only)
FIAT Croma 1.6
FIAT Duna 1.1
FIAT Duna 1.3
FIAT Duna Elba 1.1
FIAT Duna Elba 1.3
FIAT Fiorino 1.1
FIAT Fiorino 1.3
FIAT Fiorino 1.4
FIAT Fiorino 1.5
FIAT Regata 1.3
FIAT Regata 1.5
FIAT Regata 1.6
FIAT Regata S.W./Weekend 1.3
FIAT Regata S.W./Weekend 1.5
FIAT Ritmo 1.1
FIAT Ritmo 1.3
FIAT Ritmo 1.5
FIAT Ritmo 1.6
FIAT Ritmo 2.0
FIAT Ritmo Cabrio (Bertone) 1.3
FIAT Ritmo Cabrio (Bertone) 1.5
FIAT Tempra 1.4
FIAT Tempra 1.6
FIAT Tempra 1.8
FIAT Tempra 2.0
FIAT Tempra S.W./Weekend 1.4
FIAT Tempra S.W./Weekend 1.6
FIAT Tempra S.W./Weekend 1.8
FIAT Tempra S.W./Weekend 2.0
FIAT Tipo 1.4
FIAT Tipo 1.6
FIAT Tipo 1.8
FIAT Tipo 2.0
FIAT Uno 1.0
FIAT Uno 1.1
FIAT Uno 1.3
FIAT Uno 1.4
FIAT Uno 1.5
FORD (Europe) Escort 2.0
FORD (Europe) Sierra Cosworth 2.0
INNOCENTI Elba 1.3
INNOCENTI Elba 1.5
LANCIA Dedra 1.6
LANCIA Dedra 2.0
LANCIA Dedra Integrale 2.0
LANCIA Delta 1.1
LANCIA Delta 1.3
LANCIA Delta 1.5
LANCIA Delta 1.6