Hi i am new to all this. The other morning i came out to find my windscreen frozen.I applied de-icer to the screen then jumped into the car to turn on the wipers to clear the windscreen,the wiper moved about an inch then stopped dead. I have checked the fuse which is fine,I can also here the motor but have no movement on my front wipers at all any ideas?
Technical front wiper blade
- Thread starter bevt666
- Start date
Currently reading:
Technical front wiper blade
Hi,
normally there is a linkage on a ball-joint which CAN wear and pop-off
the wiper motor isn't the easiest to access. my suggestion would be;
with power OFF, lift up BOTH wiper arms so the "stand to attention"
then see if either will move in their natural arc..
if 1 does , but not the other it's a linkage popped off
FYI = https://www.fiatforum.com/punto-mk2-2b-guides/303128-cheap-fix-wiper-failure.html
let us know what you find,
Charlie - Oxford
I have the exact same problem, happening in the exact same situation on Friday morning. Did you manage to fix it, and if so, how?
Cheers
Linkage
I have a 2013 Punto, and all the information I can find both on here and other places online seems to relate to Mk 2 Puntos, so I don't know if it'll be the same process.
Hi,
you've posted in the Idea - MPV sections.. however the basics will be the same,
I also have a 2013 TA Punto - it's a Grande Punto underneath the paint..,
look here for info;
https://www.fiatforum.com/grande-punto/318536-wiper-motor-linkage.html
Charlie - Oxford
Last edited:
PM sent- no response to date
I haven't received any PM's mate.
Similar threads
