Punto 2b power cable

Does ANYONE know how to get the bastard through from the engine compartment into the main thing? Its torturing me.
Loads of love for anyone who tells me.

there is a grommet behind the battery pull it out feed cable through there comes out underneath glove box, ill attach pics in morning.
Matt

under the abs pump, there is a hole cut out in the fire proofing, poke it out and it reveal plastic bung



inside the car, pull carpet back from passenger foot well and there a square cut out, remove it and you see a hole



if you using thick cable it can easily be drilled and no risk of damaging anything else

few years since i did it though

here we go pictures s promised...
one of them is the cable coming in behind the glove box.

I Actually love you both.
Alot.

not a problem upload a pic when your done!!

Lol, i couldn't get at that because of my abs pump, but i had a stroke of genious and nicked a rubber tube heading into the bulkhead, after alot of wire poking, and a nasty gash to my knuckle i got the wire what i thought was through, looked in, and low and behold it was sitting in my passenger footwell =].

If only i had this handy when i came to fitting power cable in the 2b, well i had fun drilling through my car to fit the 0gauge

Heh, if it was 0 gauge you'd probably have had to drill anyway, it was awkward enough with 4awg

it was fine running it through the rest of the car i.e. up the side trim and into the back, just took a while to get to the battery