Guides by whitz

You will need; .latex gloves .a socket set .screw drivers .tab punches .allen key's (strong ones or socket inserts) .rubber mallet .large circlip pliers will help .a impact wrench will help alot I found it much easier to clamp the bell housing to my work bench to stop it moving around

Disclaimer, this is a guide to help you so use common sense and i take no responsibility if you damage your car.:) If the mount has gone, you can normally have a rumbling though the car as the clutch pedal is being brought up, as the power from the engine being transmitted to the gearbox and...

ive more then likely forgot to put something somewhere so add as you please so it can be tweaked a bit stuff you will need Tools goggles, axle stands, jack socket set, breaker bar, torque wrench,angle gauge, pliers Items head gasket set, head bolts, if your handy with a spanner you should...