Guides by Morty Mort

This guide applies to the 1.6 petrol engine. Tools needed: - Socket set. - Offset ring spanner set. - Flatheaded screwdriver (for the hose clamps). - WD40. - Spare clamps. - Long nose pliers. - Coolant. - Wirestrips (plastic). Optional "tools" 1: - Gearbox oil. - Funnel. - Garden hose...

Handbrake cable change. Thanks to Davren and Deckchair for information prior to this job. :) Tools you need: - A powerful ratchet 1/2" with small sizes, or preferred tool. - Jack and axlestands if not in a garage. - Screwdrivers. - WD-40. - Pliers. 1. Jack up the car, remove the rear...

Rear door dismantling. This guide will show the rear door’s main parts, how to solve problems like squeaks and locking issues, window tint and mounting of a new speaker. You can take the whole door off if you prefer. Unscrew the strap and disconnect the multiplug from the B pillar and...

Please notice this is a left side driven car. And as I am a family man, I drive a 5-door car. Why make an ICE install like this, as it could be made much better? Well, this build is definitely not in the high-end area, but it works, and has no side-effects on the car. If you have a low...

The Norwegian contribute to the Fiat Forum. This shows the car before the project. It is actually taken a year earlier. The guide applies to the 1.6 litre version, but might work with all versions. The Eibach pro system should lower the car about 30 mm. Due to wear and tear of the soft OEM...