Guides by Corvinus

Tools you need: - Key for wheel removal - Axle stands - Fixed wrench number 12 - Inline screwdriver - A press (i used a homemade one) - Tool for untightening of pads retaining screw (a metal rod bended at one end at a 45 degree angle, and flatened at the bended end like a inline screwdriver) -...

You need: - allen key number 3.0 - a tool shown in the haynes manual to dettach the radio unit (or a knife as i used) - a little bit of patcience. Here goes: - remove the fan speed selector button, the left and the right fake buttons from the button unit (the one that contains the demist...

First of all you need: -one allen key 3.0; -one cross screwdriver; -one inline screwdriver; The first step is to lower the wheel drive to it's lowest point, then open up the fuse box cover (this being a left drive it's on the left of the steering wheel): Second step is to unscrew with the...