Guides by colinf1

Items required; Mirror casings off the car 12v LED Strip x 2, (6 lights per strip) available from Maplins 1mm and 5mm hss drill bits Cordless drill Soldering Iron Solder wire 3 meters of wiring, available from Maplins Araldite rapid steel and ceramic and glass crystal clear adhesive Masking...

If your car doesnt have fog lights, you can modifiy the blank to hold an MR16 LED bulb. MR16 bulbs are 12v, so there is no need for a convertor, it just a case of running the two wires to the bulb. These are the kind of bulbs you need. A quick search on ebay and you'll find these...

To check the solder joints you need, Allen key - 4mm Torx bit - T7 or T6 Soldering iron Soldering wire A steady hand A good light source 1 - Take off fuse box cover 2 - Take of bottom steering cowling 3 - Unclip the motor wire from ECU 4 - Unbolt the motor, theres 3 hex head bolts, here you...