Guides by col7104

One will need: -Strong fingernails -Flathead screwdriver if the nails let you down -An empty jar -Hot water (from the tap) -About 15 mins of your time Step one: Open the bonnet by pulling the tab inside the car under the steering column toward you. Unclip the bonnet retention spring and lift...

Equipment: A philips head screwdriver A limb to operate said screwdriver with Method: 1. Open your boot using the key or by pulling the lever on the floor to the right of the driver's seat. 2. Proceed to unscrew the two screws you can see in the picture, on top of the light cluster. 3...

You can do it yourself without much trouble at all! If you get stuck or unsure half-way through then the forum's always open. I got my kit from shop4parts. Consists of a tensioner bearing and belt. I had to however get the belt changed as there's two pitches you can get. My engine was the...