Technical Cool air intake pipe keeps popping off on GP 1.3 diesel multijet

Currently reading:
Technical Cool air intake pipe keeps popping off on GP 1.3 diesel multijet

haymaker

New member
Joined
Feb 12, 2015
Messages
53
Points
19
As it says in the title, its as tho the little catch that holds it into the box in the middle is worn a little, any ideas were I could get a replacement, or how I can get it to stop popping off.
 
Anyone any ideas? Its a standard 1.3 diesel multijet with no mods on it or anything, so its just the normal hose that takes the air in from front of the car into air filter box in the middle. I've been looking for a similar hose online, but don't really know what to look for as every hose / pipe under the sun is appearing, and I don't know if it has to be a like for like replacement or is there something else I can put
 
Anyone any ideas? Its a standard 1.3 diesel multijet with no mods on it or anything, so its just the normal hose that takes the air in from front of the car into air filter box in the middle. I've been looking for a similar hose online, but don't really know what to look for as every hose / pipe under the sun is appearing, and I don't know if it has to be a like for like replacement or is there something else I can put


can you post a picture?..i don't know if its an interference fit or mechanical but I have used silicone adhesive in the past to secure air hoses etc.
 
can you post a picture?..i don't know if its an interference fit or mechanical but I have used silicone adhesive in the past to secure air hoses etc.


this is it here, I have pushed it back in. but, will take it out a drive, lift bonnent, and its popped out again.....
 

Attachments

  • cool air intake hose.jpg
    cool air intake hose.jpg
    37.2 KB · Views: 39
Back
Top