Technical Upgrade factory fitted hu
- Thread starter mattataa
- Start date
Currently reading:
Technical Upgrade factory fitted hu
- Joined
- May 25, 2010
- Messages
- 395
- Points
- 76
Yeah you'll need a stalk adaptor. Connects2 usually most popular. Also need a patch cable and maybe a facial. Can't think on what else. If look on forums sure there will be a guide on what need/how to do it.
Last edited:
- Joined
- May 25, 2010
- Messages
- 395
- Points
- 76
Lol I don't, ment put a fascia 
damn mobile keyboard :-(
damn mobile keyboard :-(
Last edited:
Hey again. Just for more info and i can get it into my head haha.
My factory hu is powered with can bus. It has a standard iso connection that will plug into my pioneer hu but it will not power on. I also have steering controls. I would like to be able to use this pioneer hu and the steering controls. Theres a socket in the back (looks like a 3.5mm audio jack) and a stray blue wire labeled system remote control. I would like to use this in my car so it powers on (obviously) and ideally use the steering controls. Could you send me links to the sort of things i need to get and how to do it pleasee!!!
My factory hu is powered with can bus. It has a standard iso connection that will plug into my pioneer hu but it will not power on. I also have steering controls. I would like to be able to use this pioneer hu and the steering controls. Theres a socket in the back (looks like a 3.5mm audio jack) and a stray blue wire labeled system remote control. I would like to use this in my car so it powers on (obviously) and ideally use the steering controls. Could you send me links to the sort of things i need to get and how to do it pleasee!!!
