(S) GP armrest (diy :))

the base is made of plastic witch is screw up with 4 screws it will be god to secure it for long duration,because the the plastic it self will broke if someone push it harder
so you can use one matal plate 2-5 mm,mesure the inside of the base and cut it


then with the drill you make holes for the screws and plastic reinforce


after you use then iron brush and you have to brush the metal god(you must to do it no mater if is rusty like mine,or new, you have to do it for the paint so it can better catch)




than use some paint to protect the metal


after the paint is dry you put the plate under the base and srew the base with the armrest
you must screw first base and arm rest because later is late hehe



finnely its done this leader thing can go 10 cm foward if you want

that is a really smart job you done there

what can you fit in it, and can you lean on it okay when your driving etc

(does the rear passenger mind that you have stolen there cup holder )

Nice....can you put it in the guide section please

http://www.fiatforum.com/grande-punto-guides/

That's pretty impressive - well done

you can put more stuff in there then before in the cup holder heheh
its perfect to drive first is realy strong so you can lean on it,you can adjust the armrest it can go up-down,back-front so its not bodering you when you driving

The one on my stilo gets a bit in the way when you need to do quick gearchanges, so i leave it up.

i normally only use it when im on the motorway or on fast, smooth a -roads

i also use it for mint and sweetie storage

Where is the artrest from? is it one of the ones from ebay?

im not sure,i didnt bought from ebay,but this armrest is not the original from gp sport,so i dont know the qulity of the ones from ebay

hope its not the one from the sport otherwise it would be invisible as they dont have them

in GP 1.9 sport,here we have armrest,but is it in serial equiment