Hi guys the pressed steel gearbox end cover plate on my 2004 ducato 2.8 is rusted and seems to be leaking oil thru it any one know where I can get a new one from ?
thanks
geordie

geordie01 said:

Hi guys the pressed steel gearbox end cover plate on my 2004 ducato 2.8 is rusted and seems to be leaking oil thru it any one know where I can get a new one from ?
thanks
geordie

Click to expand...

Do you mean the 5th gear end or the clutch end? Is the leak between the cover and the gearbox?

Hi it is the 5th gear end cover plate
ta
g

Fiat 9632808880 used to be about 60

I'd be surprised if it was perforated though, if the leak is between the plate and the main housing take it off check the inside if its in good condition, hammerite it, planish any bend/dents and refit with black RTV.

Thanks for that will check it out
G

hi does any one know were to get a end cove plate for the 5th gear
thx

Whats your vin

hi i get back to you

corcai said:

Whats your vin

Click to expand...

vf3232d9c15073137
hope you can help
thx s

slowpace said:

vf3232d9c15073137
hope you can help
thx s

Click to expand...

VF3 is a peugeot boxer, that vin is unknown in peugeot service box double check the digits.

First part is correct VF3232

ok will do thx/////
gearbox on Peugeot 2.5D 1996, thanks

hi this is the motor

that is the number i was given thx you

Cant tell you anything without a working VIN some of the pug 2.5 were their own engine, some were iveco, totally different gearboxes.

thx for reply

Hi i have the same problem on a 1999 2.8 idtd with a MG5T box does any one know where i can get a cover from the part number is 9614498188 i have also tried peugeot and citreon and got it out on all the breakers sites

geordie01 said:

Hi guys the pressed steel gearbox end cover plate on my 2004 ducato 2.8 is rusted and seems to be leaking oil thru it any one know where I can get a new one from ?
thanks
geordie

Click to expand...

Hi geordie ! I know this is a very old post but did you ever source this part ! I have a similar problem ! Regards Richard