Technical another OBD question

Currently reading:
Technical another OBD question

flashingblade

New member
Joined
Feb 23, 2009
Messages
5
Points
2
Location
bury
hi. I already have an Autel AL319 obd2 reader and I need a converter plug
or cable to be able to plug into my 2007 3.0 ducato.
can anyone point me in the right direction ?
 
thanks Charlie. the plug I'm looking at is in the fuse box, to the right of steering column. maybe the question I should be asking is - is this the right one ?
22507_10153021933766785_8720902403439325834_n.jpg
 
if I clarify, I might get the answer I want.
my abs light has come on after doing a bit of diy.
I can only presume I have nicked a cable which runs inside the chassis rail.
it might have just earthed and needs resetting or I might have to check all the cables and replace one ( not the option I really hope for )
there might be another reason why the light has come on but it seems too coincidental.
....geoff
 
if I clarify, I might get the answer I want.
my abs light has come on after doing a bit of diy.
I can only presume I have nicked a cable which runs inside the chassis rail.
it might have just earthed and needs resetting or I might have to check all the cables and replace one ( not the option I really hope for )
there might be another reason why the light has come on but it seems too coincidental.
....geoff

Hi Geoff,
can't quite see enough detail in pic,
but it's basically a rectangular plug socket - but with sloping "triangular" edges - to ensure correct orientation..,

to reset ABS you will need the correct colour lead ( for MultiECUScan)

not sure with other devices / applications

see multiecuscan applications list for more detailed info in the pin-cutouts required for ABS connection,


Charlie - oxford
 
Back
Top