Things go from bad to worse......

This morning I thought, right I'm going to run an earth wire from the front to the back. I wired in the receiver correctly at the front and tested the system, all OK using 12V from reverse lamp and an earth from the front.

Ran the earth cable front to back under the chassis, connected it all up and guess what, it doesn't work. Connected it back up how it was previously, and it still doesn't work, so I'm a little unhappy right now. Looks like I'm going to have to fork out another £20 for a new system....

AhhhhAhhhhAhhhhAhhhhAhhhhAhhhhAhhhhAhhhhAhhhhAhhhhAhhhhAhhhhAhhhhAhhhhAhhhhAhhhhAhhhhAhhhh

Yipeeeeeeee

At last I have working sensors......

In the end came down to the conclusion the distance for the wireless kit from front to back with all the metal work in the way was just to marginal, sometimes it worked, most times it didn't.

In the end got a wired kit with a buzzer for inside the cab, powered from across the reverse light and cable back to front, through the hole in floor where the handbrake cable goes, jobs a goodin, took less than hour this morning to get it sorted.....

Thanks for all the input ....