Hi There, My newly purchased single seat arrived today,(drivers) seems to be as you said interchangeable everything that is except the seat belt bracket seems fixed(welded) to the runner, as I need to switch this to the other side I'm
lost as how to, All help gratefully accepted.
I wait in hope thanks guys.

ALL SORTED GUYS
Just needed a bit of fettling, drilled out spot weld's etc repositioned and with a
bit more jiggery and pokery its there
cheers TEZ

TEZ217 said:

ALL SORTED GUYS
Just needed a bit of fettling, drilled out spot weld's etc repositioned and with a
bit more jiggery and pokery its there
cheers TEZ

Click to expand...

Did you weld it or bolt it the other side very little clearance for fixings in the rails

Hi moodrater
The seat belt bracket is originally spot welded on to the base but the bolt to hold the seat on to the rails actually pass's through it, so I repositioned on the other side used a nut and bolt to hold it in place then welded it, removed temporary bolt and put the seat back in place (there's also a spacer on opposite side to compensate for bracket thickness this I also removed and replaced on other side, didnt need welding as again the seat bolt went through it, I though job was done until I found out you need longer bolts for front of seat metric fine couldnt get them waiting for the breakers to send them on to me . hope this makes sense.

Thanks, I just took mine out actually and put back in the double so that our sulky teen can bring a sulky teen friend camping :-D

That's why mine came oot !!
No passengers other than the missus

TEZ217 said:

That's why mine came oot !!
No passengers other than the missus

Click to expand...

I see where you're headed, you'll replace the single seat with a folding seat, then no seat and head off on your tod

NAH she's a keeper mate, after 40 years with the same lady you know !!
( anyway all them years of training her would be wasted ) lol lol