Technical A gift for christmas: New Ducato Manual - X250

Currently reading:
Technical A gift for christmas: New Ducato Manual - X250

Hi
Was going to say just go to the downloads section but just tried the 02-06 eLearn link in there to find after all this time the file has disappeared from rapidshare along with the DTE version as well :eek: :eek:
So try here for the 02-06 Ducato - http://www.filefactory.com/file/5st...le_Tecnico_D_officina_-_Fiat_Ducato_02-06.rar
Check previous posts for gearbox/reverse switch location -
https://www.fiatforum.com/ducato/279452-2-8-jtd-gearbox-breather-reverse-switch-location.html which are places you can fill the gearbox from (2.7liters for 2.8 JTD not the 2.1 as in the manual - not sure if the 2.0JTD is the same box?) but the easiest place is from the speedo transducer hole but be extemely careful that the plastic drive gear & the retaining bolt & its washer (& dirt etc) don't fall into the gearbox.
There are also posts on handbrake adjustment procedures on here as well somewhere.
Cheers
 
I am seeking the eLearn software for the
Fiat Ducato III Type X 250 from year 2011 with the engine
150 Multijet

Is this Version
Ducato X250 eLEARN
in the Download Section (with 7 parts)
the right version, or it relates to engines that were built between 2006 to 2011.

Thanks

PS
It is not allowed to me to post the link to the downlaod Section.
 
Hi Welcome to the forum,
Unfortunately there is only one version of the X250 eLearn "loose" on the net & that covers the first versions of the X250 (06/07 to 09?) which covers 2.2, 2.3, 3.0 Multijet engines.
There are no later versions for X250 "loose" & the eLearn is now only on a USB key called keyLearn. As was the original X230, X244, & X250 CD eLearn, these were only available to authorized Fiat dealers. So the best you are going to get is the old X250 eLearn as the 2.3 engine in that is basically the same as the Multijet 150 & of course it doesn't cover any of the Euro5 stuff. So I would go for the X250 version in the downloads section - as far as I know there is nothing else.
Cheers
 
Thank you for your informative explanation!

To FreeSpirit
Thank you for your informative explanation!

Elvis
 
Hi FreeSpirit.

Please can you advise where can I download the X250 manual you mentioned?

Our van (adria Twin) is an 2007 X250 with the 3.0 160 multiJet engine so that version of the manual would be perfect for our vehicle.
 
Hi TechDriver
Here is a link to a Zipped version of the X250 eLearn (WSM on CD) -
http://filefactory.com/file/3bkt8mrd0v4n/X250.zip

There is also a RAR version which is also a type of compressed version of the Image of the original eLearn CD the link is a follows here -
http://filefactory.com/file/7iwsik1fizzt/eLearn_Manuale_Tecnico_D_officina_-_Fiat_Ducato_X250.rar

There are instructions in the guides section on how to burn these to a CD & install on your system. The Zipped version is probably easier if you haven't burnt CDs before.
See "Downloading & Burning 244/250 eLearn ISO CD image"
https://www.fiatforum.com/ducato-guides/453189-downloading-burning-244-250-elearn-iso-cd-image.html
Cheers
 
Back
Top